repository
대용량 풍력발전 시스템 설계를 위한 파라미터 계측 및 제어 알고리즘 개발
- Alternative Title
- Parameter Measurement and Control Algorithm for a High-Power Wind Generation System
- Author(s)
- 강이규
- Alternative Author(s)
- Kang Yi Kyu
- Advisor
- 이교범
- Department
- 일반대학원 전자공학과
- Publisher
- The Graduate School, Ajou University
- Publication Year
- 2011-02
- Language
- kor
- Keyword
- 풍력발전시스템; 동기인덕턴스; 영상분 순환전류; 공진보상; 영구자석 회전자의 초기위치
- Alternative Abstract
- This paper proposes two algorithms for driving in a wind power system using an IPMSG (Interior Permanent Magnet Synchronous Generator). First of all, this paper presents a simple scheme to estimate the initial rotor position and the d-, and q-axis inductances for an effective Maximum Torque per Ampere (MTPA) operation. An IPMSM essentially requires an exact coordinate transformation and accurate inductance values to use a reluctance torque caused by the saliency characteristic. In the proposed high-frequency voltage testing method, there is no voltage drop caused by the resistance and the electromotive force. The initial rotor position and the inductance can be measured through the analysis of the stator current without turning the rotor. A power conversion system in a wind turbine using a Permanent Magnet Synchronous Generator (PMSG) is directly connected between a generator and a grid. The capacity of power semiconductor switches and filters should be selected regarding the overall system rating and the output power quality. The use of an LCL-filter and n-parallel power conversion devices can be the best solution for these problems in a high power system. However, the resonant pole introduced in the LC part produces resonance in the system leading to the stability problem. The voltage difference between the parallel back-to-back converters generates a zero-sequence circulating current. In this paper, a novel control method using a PQR transformation for simultaneously compensating of both the LCL-filter resonance and the zero-sequence circulating current in a wind power system driven by 3-parallel back-to-back converters is proposed. The effectiveness of the proposed algorithms is verified by simulations and experimental results.
- Fulltext
- Appears in Collections:
- Graduate School of Ajou University > Department of Electronic Engineering > 3. Theses(Master)
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
-
- License
- STATISTICS
- Total Visit :3,757,435
- Total Download :1,818
- Today View :3,627
