repository
Special Graduate Schools
Graduate School of IT Convergence
Department of IT Convergence Engineering
3. Theses(Master)
전자담배의 비용절감을 위한 필름히터의 설계기법
- Subtitle
- Design of a Film Heater for cost reduction in Electronic Cigarettes Heating Units
- Author(s)
- 정미진
- Advisor
- 이교범
- Department
- IT융합대학원 IT융합공학과
- Publisher
- The Graduate School, Ajou University
- Publication Year
- 2022-08
- Language
- kor
- Abstract
- 본 논문에서는 전자담배의 비용절감을 위한 발열부의 재료 선정 및 설계기법을 제안한다. 전자담배의 사용이 증가하고 관련시장에서 경쟁이 치열해지면서 비용절감을 위해 히터저항과 센서저항을 일체형으 로 설계한다. 기존의 히터저항으로 사용하고 있는 구리(Copper)는 발열속도가 콘스탄탄(Constantan, 구리와 니켈의 합금)에 비해 발열과정에서 TCR (Temperature Coefficient of Resistance) 값이 높아 온도상승 속도가 느리다. 구리와 비교하여 TCR 값이 낮은 콘스탄탄을 사용하면 빠르게 온도가 상승하게 되어 짧은 시간에 원하는 온도까지 도달이 가능하다. 이론데이터를 기반으로 제안한 설계기법의 타당함을 검증한다.
- Alternative Abstract
- This paper proposes a material selection and design technique for the heating unit to reduce the cost of e-cigarettes. As the use of e-cigarettes increases and competition intensifies in related markets, heater resistance and sensor resistance are designed integrally to reduce costs. Copper used as the existing heater resistor has a higher temperature coefficient (TCR) value in the heating process than Constantan, and thus, a temperature rise speed is slower. Constantan (Constantan, an alloy of copper and nickel), whose TCR value is lower than copper, quickly increases the temperature, enabling it to reach the desired temperature in a short time. It verifies the validity of the proposed design technique based on the experimental data.
- Fulltext
- Appears in Collections:
- Special Graduate Schools > Graduate School of IT Convergence > Department of IT Convergence Engineering > 3. Theses(Master)
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
-
- License
- STATISTICS
- Total Visit :3,539,378
- Total Download :1,795
- Today View :1,742
